Author: Julian Melo

  • Bix3 Maiden Flight

    Bix3 Maiden Flight

    Here’s my video review of the maiden flight of the Bix3/Bixler 3 from Hobbyking.

  • Bix3 Unboxing and First Impressions Video

    Bix3 Unboxing and First Impressions Video

    Here’s my unboxing and first impressions video of Hobbyking’s newest FPV platform, the Bix3. Here’s a list of changes from version 1 and 2. – Removable wing: the mechanism works great. The wings are longer. – Landing gear: removable main and steerable tail wheel. – Wooden FPV platform (canopy) included. – Lower KV motor and […]

  • Mini Tricopter Maiden FPV Flight

    Mini Tricopter Maiden FPV Flight

    This is the maiden FPV flight of my Mini Armattan FPV Tricopter. More info about this frame click here

  • Rippin’ it Up

    Rippin’ it Up

    Getting more comfortable with the Swift Hex, my 3D printed 300mm mini hex frame. Loving the Naze32. These are my first rolls. Check out the maiden FPV video below.

  • Swift Hex – 300mm 3D Printed Hex Frame

    Swift Hex – 300mm 3D Printed Hex Frame

    Introducing the Swift Hex, a mini sized hexacopter that I designed and 3D printed, specifically for FPV. Its design was inspired by the Blackout Spider Hex, but seeing as it is currently unavailable, I decided to designed and make my own. It is exactly 300mm motor to motor. It uses 37mm spacers, just because that […]

  • A is for Azusa

    A is for Azusa

    After seeing these letter on the side of the foothills all over Southern California, I decided to try to fly close to them via FPV. Here is me second attempt (the first one was B is for Burbank, click here to watch that video). Please excuse the excessive jello and vibes; the CC3D controller isn’t […]

  • Turbo Commander – Maiden Flight

    Turbo Commander – Maiden Flight

    This is the maiden flight of the Turbo Commander, a collaboration between Mateo Aguilar and Julian Melo. It was shot in early January 2014 at the Apollo Field in Southern California. The airplane and no bad tendencies, required just a couple click of elevator trim and it flew amazing. More information about the build process […]

  • Hansen Dam FPV – Warbler

    Hansen Dam FPV – Warbler

    Location: Hansen Dam in Southern California. Airplane: Warbler (scratch-built. more info here). Control: Taranis + HawkEye OpenLRS Video: Immersion RC 5.8 ghz. 5 Turn Helical on goggles.

  • Scratch-Built Turbo Commander

    Scratch-Built Turbo Commander

    The (Gulfstream? Rockwell?) Turbo Commander airplane has always had a special place in my heart; it was the plane my dad and his pilot friends used to fly. Its a twin-engine, pressurized, jet-prop 10-passenger airplane, better known as Bob Hoover’s acrobatic plane (his was a Shrike, a piston-powered Aero Commander variant). Over the holiday season, […]

  • Durafly Auto-G2

    Durafly Auto-G2

    Check out these amazing in-flight shots of my Auto-G2, taken by Ken Simmons at the Apollo 11 field in Los Angeles, which by the way, flies amazing.